| Picture |
Heading |
Updated |
 |
Tape Gaskets
It is produced with pure PTFE and it presents: High chemical resistance(pH0-14), Temperature resistance: -200'C up to +260'C, Unchangeable during the time, In-combustibility |
2017-11-08 |
 |
PTFE
PTFE has a wide range of practicable temperature from 180%°C - +260°C and a wax-like surface to which anything hardly sticks. |
2017-11-06 |
 |
Graphite PTFE Packing
PTFE braided packing with graphite is woven of graphite PTFE yarn twisted through a mixture of PTFE dispersion resins and fine graphite powder, with a moderate amount of heat-resistant lubricant. |
2017-10-22 |
 |
wire reinforced Ceramic fiber braided packing rope
Conditions: Ceramic fiber braided packing rope is used as heat insulation in industrial furnace, gas and chemical equipment, pipe’s heat insulation, sealing material for pumps, compressor, and valves’s heat preservation, as well as outside jacketed materi |
2017-10-18 |
 |
Braided Graphite PTFE Packing for pumps and valves
Braided Graphite PTFE Packing for pumps and valves is a braided packing made of PTFE yarn without soaking any PTFE dispersion and lubrication but with greatly enhanced ability to seal high speed shafts with the addition of inactive and heat-resisting agen |
2017-10-12 |
 |
Grooved Gaskets
Corrugated Metallic Gasket is the preferred gasket when improved performance at low seating stresses is required. It features excellent anti-blow-out properties linked with the reliably of a solid metal-to-metal seal combined with a soft sealing face to p |
2017-10-02 |
 |
Rubber Gaskets
Rubber gasket are the most widely used of the gasket, it with polymer be vulcanized, adding fillers, pigments and various additives composed of synthetic rubber, has quite excellent compressibility and resilience, only need very much at the end of the pre |
2017-09-20 |
 |
Rubber Sheets
Product: rubber sheet black color; Specification: 1-80mmx2000mm(TXW); Performance: With middle pressure, good water proof, anti shock and sealing performance; Density: 1.6g/Cm3; Tensile strength: >3.0MPa; Hardness: 75shoreA; Elongation: >200%; Work temper |
2017-09-18 |
Friends links